So, you are desperately looking to sell your favorite car just because it looks old? If it is true, then get rid of that thought. You can get that showroom-fresh shine again by waxing it with a buffer.

Perhaps, you are wondering, how to wax a car with a buffer? How long it takes to wax a car? Thousands of similar questions may come to your mind. Well, sit back and relax! We are here to make things easier for you.

Waxing a car can be a difficult job, but its outcome is undeniably satisfying. With the best-quality wax and little know-how, you can do it in an instant.

Many of us tend to spend hours spoiling our cars. However, using the right technique with the right products can give a used car a mirror-like finish. It also retains the car’s beauty and value.

Without further ado, let’s take a look at some tips at a glance.


In the process of waxing a car with a buffer, the first job is to choose the right buffer. Therefore, it means that you have to determine which type of buffer is appropriate for your car. Whatever your vehicle may have swirl marks, scratches, and other substantial damages.

So, the buffer has to be capable of dealing with these damages. There are mainly two types of buffer you can use for waxing.

1. Dual Action Orbital Polisher

Dual-Action Orbital Polisher operates by rotating and oscillating in two different ways. It is excellent for waxing because the buffer is easy to control. Also, it doesn’t damage the paint; instead, the beginners can use it easily.

2. Variable Speed Rotary Polisher

Variable-Speed Rotary Polisher looks like an orbital polisher, but it rotates in one direction. It can remove scratches and swirl marks well. As it provides too much pressure, so it could damage the paint. It is not a good option for beginners and also not for waxing.

Different Types of Wax for Car


Car wax comes in different forms. The followings are the most popular types of wax in the market:

1. Spray Wax

Spray wax for the car is the most used type of wax. It is easy to apply and takes minimum time to get settled on the car surface.

2. Paste Wax

Paste wax in the tougher to apply because of the thickness. It takes more time than other types, but the result is long-lasting.

3. Liquid Wax

Liquid wax sits in the middle of spray and pastes wax in terms of effort and result. You have to shake it before using it to mix the ingredients.

Preparation for Wax


Before you learn how to wax a car with a buffer, make sure you’ve done the following steps.

1. Gather the Materials You Need

  • Machine buffer (We prefer to use DA orbital polisher),
  • Car wax,
  • Polishing compounds,
  • Car wash soap,
  • Clay bar,
  • Finishing pad,
  • Microfiber towels,
  • Synthetic chamois.

2. Wash Your Car and Remove Dirt & Grime

Start with washing your car with car soap and clean water. Give it a thorough cleaning to make sure the surface is ready to wax. After a thorough cleaning with soapy water, rinse it thoroughly. Remove any dirt with a clay bar.

Finally, rinse it with more water. Then, dry the car with chamois from top to bottom. Moreover, or you can try the fastest way to dry a car.

Tips:

Make sure you start the process of waxing in the shade or your garage. It will help to avoid direct sunlight. The sunlight can affect the process.

You can also clean the wheels with a wheel cleaning brush.

3. Mask the Areas You Want to Protect

The car buffer rotates at a certain speed. It generates a lot of heat on the car surface. If you want to protect headlights, badges, moldings, taillights, etc. mask the area with masking tape. Also, masking can protect those areas from the buffing pad.

How to Wax a Car with a Buffer?


Waxing with a buffer helps to remove the dull look from the car. It keeps water and other elements getting into the bare metal. Also, it helps to get rid of the dull look that happens because of all the ingredients.

Here, we are considering that your car has light scratches. If your car has light scratches, you should buff it before waxing. Moreover, this will boost the effectiveness of wax. Here is how you should proceed.

1. Buffing the Car​​​​


Buffing leaves a glossy finish by removing oxidation and light scratches. Use a wool pad and buffing compound as they are more abrasive. Apply the buffing compound over the car surface and spread it with the wool pad. Thus, it helps to remove minor scratches.

2. Apply the Wax


At first, attach the wax applicator pad to the buffing machine. Before turning on the power, apply the wax either on the pad or over the cat surface. Or you can add in both the car surface and an applicator pad.

Make sure you’ve added a little amount to the section you’ll be working on that. Also, use a circular motion while applying the wax.

3. Buff the Waxed Surface


Now turn on the buffer and wax it without exerting a lot of pressure. Use straight, long, sweeping strokes to buff the surface. Use the buffer in any section two or three times. There should be enough wax to avoid any damages. Let the wax dry and wait until it gets a cloudy look.

Tips:

  • Do not put too much pressure on the buffer; let the buffer do its work.
  • Use even pressure to give it a thin coat of wax.
  • 4. Remove the Wax


    Once the wax is completely dried, it’s time to remove the wax. Use a microfiber towel and wipe away the wax in a straight line. It helps to avoid any scratches. If needed, use more than one microfiber towel.

    Do it until you get a sleek and glossy finish. After everything is done, clean the buffing pads. Learn how to clean a buffing wheel in this article.

    How Often to Wax a Car?


    The famous automotive company, Edmunds, has clearly stated how often tp wax a car (https://www.edmunds.com/). According to them, you should wax your car in every 3-4 months.  Depending on the temperature, you may have to wax more often. You especially have to do it if you live in colder temperature.

    Note that different waxes work differently. For example, synthetic wax will last for about a year. You can wash and wipe your car with a microfiber towel regularly. Also, clean the interior plastic elements with the car plastic cleaner. In any way, you have to wax your car frequently to maintain its shine.

    What If You Apply Car Wax by Hand?


    Many car owners prefer to apply car wax by hand. It is not a bad practice, but comparatively, waxing with a buffer is a wise decision. Here is why;

    • Waxing with hands is time-consuming. Some waxes require to apply and remove as fast as possible. If it takes time, it can affect your car surface. On the other hand, you can wax your car with a buffer quickly and get a better result.
    • It takes too much physical effort if you wax with hands. The continuous application and removal of wax can cause fatigue in arms.
    • You may not get even coverage on the paintwork if applied with hands. There will be a thick layer in some sections, while other parts will likely have a different thickness.

    Last update on 2020-08-01 / Affiliate links / Images from Amazon Product Advertising API

    Conclusion


    Well, we hope you’ve learned how to wax a car with a buffer. Also, you know the steps involved in waxing a car with a buffer. Is it worth it? The joy you will get at the end is worth it. Along with learning to wax can save your hundred bucks. So, chill out and admire your work.